Description
Gr2 Vivoil Vivolo Industrial Aluminium Gear Pump – 11cc – 1/2″ BSP – 260Bar
We recommend using any gear pumps at speed higher than 1000rpm and pressures not exceeding 220bar continuously to ensure longevity.
Series: XV series
Group 2
Type: 11cc
Body: 1/2” x 1/2” BSP threaded Ports = G08xG08
Shaft: CO001 – Tapered 1:8 – Ø17.4 – M12x1.5 (17 – 15mm over 2 mm) – 4mm Key
T.2 [Nm]: 233.2
Always make sure that the torque applied is less than or equal to the admissible torque of the shaft.
Standard Rotation: Clockwise (Rotation can be converted on request)
Displacement: 10.8 cm³/rev
Max Working Pressure: 260Bar
Max Peak Pressure: 300Bar
Min Speed: 700Rpm
Max Speed: 3500Rpm
Type of fluid to be used: Mineral-based hydraulic oil HLP HV
Recommended Viscosity: 20 mm²/s – 100 mm²/s
Recommended fluid operating temp: 30°C – 50°C
96mm x 71.4mm Mounting
36.5mm Spigot
Constructive Features:
Extruded alloy Series 7000, head treated and anodized
Flange and Cover: Die-Cast aluminium alloy, heat treated and anodized
Gear Bush Bearings: Special heat-treated tin alloy and high anti-friction capacity
Gears: Steel UNI 7846
Seals: A727 Standard Acrylonitrile F 975 Viton FKM
Back-Up Rings: Virgin PTFE, Tecnil Q3
Torque Settings
Rear Bolts: 40-50Nm
Nut on Shaft: 40Nm Max
Other known codes: X2P4702EBBA, VI-XV2P11-CT, 0510525039, 1L16DE10R, 1L18DE10R, 20C10X016, 20C11X016, 20C12X016, 2PB11.3DG28P1, PA211DMLG4G4BST
Reviews
There are no reviews yet.