Description
Gr3 Vivoil Vivolo Industrial Reversible Gear Motor G16 + Drain G06 – 54cc
We recommend using any gear pumps at speed higher than 1000rpm and pressures not exceeding 220bar continuously to ensure longevity.
Series: XV-3M XM207 Ø50.8 Flange – Taper Shaft
Type: 54.00cc
Group: Group 3
Category: Reversible Motor
Cover with External Drainage – 3/8” BSP = G06
Displacement: 54.60 cm³/rev
Shaft: CO001 – Tapered 1:8 – Ø22 – M14x1.5 – key thk. 4 – T.2 Nm 482
Flange: Ø50.80 Standard European Reversible rotation
Inlet and Outlet Ports: 1” BSP = G16
Torque | Power (1000 rev/min 100Bar): 73.86Nm 7.74KW
Always make sure that the torque is less than or equal to the admissible torque of the shaft.
Max Pressure: 250Bar
Max Working Pressure: 230Bar
Max Drain Pressure: 6Bar
Min Starting Pressure: 10Bar
Min Speed: 700 rev/min
Max speed: 2300 rev/min
Type of Fluid to be used: Mineral-based hydraulic oil HLP HV
Recommended Viscosity: 20mm²/s – 100mm²/s
Recommended Fluid Operating Temp: 30°C ~ 50°C
Constructive Features:
Motor Body: Extruded alloy Series 7000, heat treated and anodized.
Flange and Cover: Die-cast aluminium alloy, heat treated and anodized
Gear Bush Bearings: Special heat-treated tin alloy, high anti-friction capacity.
Gears: UNI 7846 Steel
Seals: A727 Standard Acrylonitrile
Back-up Rings: Virgin PTFE, Tecnil Q3
Torque Settings
Rear Bolts: 60Nm
Nut on Shaft: 75Nm Max
Other known codes: X3M8201AEEE, X3P8201AEEE, X3M8201A, XV-3M/54, VI-XV3M54-BT, XV3M54


Reviews
There are no reviews yet.